View 050-110_8402149.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this copyrighted document is the property of glenair, inc. and is furnished on the condition that it is not to be disclosed, reproduced in whole or in part, or used to solicit quotations from competitive sources, or used for manufacture by anyone other than glenair, inc. w ithout written permission from glenair, inc. the information herein has been developed at glenair's expense and may be used for engineering evaluation and incorporation into technical specifications and other documents which specify procurement of products from glenair, inc. 050 - 110 media converter, single channel 1000base - t to 1000base - lx 10, 5-36 vdc, smf, gfoca (fo), m38999 (signal), m38999 (power) rev description date approved 2 6/12 /2014 mf
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 2 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc 1000base - t to 1000base -lx 10 , gfoca, smf, 5 - 36 vdc the glenair 05 0 - 110 , gigabit ethernet media converter , communicates between 10/100/ 1000base - t and 1000base - lx 10 protocols. it is designed for harsh environme nts and incorporates electronics in an environmentally sealed enclosure that incorporates three environmental connectors; m38999 connectors are utilized for power and for electrical signal and a gfoca connector is used for the fiber optic signal s. key features/benefits ? 1310nm fp lasers to support 1000base - l x 10 ? ingaas pin pd to support 1000base - lx 10 ? in p ut power regulator to support 5 - 36v input power ? gfoca fiber optic connector inter - mates with tfoca ii ? ? electrical interface compliant with ieee 802.3 ( 10/100/ 1000base - t) ? optical interface compliant with ieee 802.3 (1000base - lx 10) ? magnetics on the electrical signal input side to support the 1000base - t requirements for 100m cable length ? ip67 in ma ted condition optional features ? built in test console port accessible via usb2.0 ? built in test console port accessible via uart applications ? harsh environment ethernet for airborne, tactical and shipboard applications
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 3 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc functional block diagram name insert arrangement function media converter mating plug connector j1 electrical signal, status and built in test (bit) d 38999 series iii type, 19q - 18 14x size 22d pins 4x size 8 quadrax pins generic pn d38999/26# f18sn glenair pn 257- 606 - g6##19 - 18sn j2 power d 38999 series iii type, 9 - 35 6x size 22d pins generic pn d38999/26# a35sn glenair pn 233 - 105 - g6##09 - 35sn j3 fiber optic signal gfoca receptacle polarization key 1 shown tfoca ii ? plug glenair pn family 180- 145 gfoca hermaphroditic plug connector mil - dtl - 83526/16 type, 4 channel note: # = environmental class (material/finish)
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 4 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc built in test (bit) functionality - optiona l features this media converter can be offered with built in test functionality accessible through a console port via universal serial bus 2.0 (usb 2.0) or via rs422 uart ( txd) or both options can be made available. functional block diagram for this is shown below. universal serial bus (2.0) bit ? presents itself as a ?virtual? communications port ? compatible with microsoft windows, mac, and linux os?s. ? on the computer side, open any terminal application (putty, hyperterm, teraterm, etc.) to communicate with the media converter hardware. ? simple ?human readable? status messages. ? this interface may run concurrently with the rs422 uart rs422 uart ( txd) bit ? useful for when you are interfacing with a embedded microprocessor or micro controller. ? status messages delimitated to allow for easy parsing by embedded software. ? this interface may run concurrently with the usb port alarm status messages fiber side alarm/status ? temperature ? transmitter disable status ? transmitter fault alarm status ? receiver loss of signal (los) or signal detect (sd) status copper side status ? link status (up or down) unit identification information ? unit serial number ? unit product code ? unit description
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 5 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc typical console port window (putty)
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 6 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc built in test (bit) functionality ? uart this media converter can be offered with built in test functionality accessible via an rs - 422 port. the uart bit message is a 10 bit message with an update rate of 1 hz. the message format can be seen below. alarm status messages ? fiber link status (up or down) ? copper l ink status (up or down) ? power supply status (in range, or fault) serial status message bit mapping bit description 0 channel 1 fiber optic tx fault (1 = fault, 0 = no fault) 1 channel 1 ethernet copper link up (1 = link up, 0 = link down) 2 channel 1 power supply voltage ?in range? fault (1 = fault, 0 = no fault) 3 not used 4 channel 2 fiber optic tx fault (1 = fault, 0 = no fault) 5 channel 2 ethernet copper link up (1 = link up, 0 = link down) 6 channel 2 power supply voltage ?in range? fault (1 = fault, 0 = no fault) 7 not used
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 7 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc ratings and specifications e thernet c ompliance a bsolute m aximum r atings parameter symbol min typ max units notes storage temperature ts - 55 +100 c supply voltage v cc - 0.5 40 v o perating c onditions parameter symbol min typ max units notes operating temperature t op - 40 +85 c supply voltage v cc 5 28 36 v supply current icc 100 150 ma @28vdc power supply noise (peak - peak) v cc ripple 200 mv o ptical c haracteristics ? t ransmitter parameter symbol min typ max units notes optical output power p out - 8 .5 - 4 - 3 dbm 1310nm fabry - perot optical wavelength out 1285 1310 1345 nm spectral width ? 3.5 nm o ptical c haracteristics - r eceiver parameter symbol min typ max units notes optical sensitivity ( input power range ) p in op - 20 0 dbm min. sensitivity, ber 10 -12 , prbs 2 - 7 - 1 p in min - 22 - 20 dbm pin pd , lx10 source overload, ber 10 - 12 , prbs 2 - 7 - 1 p in max 0 dbm optical wavelength in 1 100 1310 1 590 nm parameter medium type distance notes gigabit ethernet, ieee 802.3ab, 1000base - t tia/eia - 568 - b cat 5e 100m gigabit ethernet, ieee 802.3z , 1000base - lx 10 single mode fiber (9/125m) 10 km
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 8 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc ratings and specifications (continued) compliance specification s characteristic standard condition notes mechanical shock mil - std - 810 40g 6 - 9rms mechanical vibration mil - std - 810 30g rms esd mil - std - 883 class ii 2200v hbm mating durability mil - dtl - 38999/20 500 cycles gfoca (tfoca ii ? equivalent) mil - dtl - 83526 (draft) 2000 cycles conducted emissions, power leads, 30 hz to 10 khz mil - std - 461f ce101 conducted emissions, power leads, 10 khz to 10 mhz mil - std - 461f ce102 conducted susceptibility, power leads, 30 hz to 150khz mil - std - 461f cs101 conducted susceptibility, transients, power leads mil - std - 461f cs106 conducted susceptibility, structure current, 60 hz to 100 khz mil - std - 461f cs109 conducted susceptibility, bulk cable injection, 10 khz to 200 mhz mil - std - 461f cs114 radiated susceptibility, magnetic field, 30 hz to 100 khz mil - std - 461f rs101 radiated susceptibility, electric field, 2 mhz to 18 ghz mil - std - 461f rs103 radiated emissions, magnetic field, 30 hz to 100 khz mil - std - 461f re101 radiated emissions, electric field, 10 khz to 18 ghz mil - std - 461f re102 flame resistance eia364 - 104 30 seconds damp heat eia364 - 321 240 hours eye safety cdrh and iec - 825 class 1 laser product
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 9 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc materials /finish item material notes d38999 & gfoca stainless steel , nickel plated (gfoca only) d38999 inserts thermoplastics interfacial seals , 38999 only elastomer, fluorosilicon optical ferrules & sleeves zirconia, ceramic printed circuit boards fr4/polyimide housing stainless steel, nickel plated + carc 34094 paint d38999 inserts thermoplastics o - ring seals (gfoca) epdm
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 10 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc outline drawing & panel cut out panel cut out C j3
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 11 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc carc paint application and masking paint carc 34094 (green 383) per mil - dtl - 53072 except as shown above
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 12 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc input/output definition j1 ? electrical signal connector d38999 series iii 19q - 18 mating face for pin shown 14x size 22d 4x size 8 quadrax j1 pin function assignments pin name description notes pin name description notes a pss power supply status 1 k1 nc no connect b1 ch1 - mda+ channel 1, mda+ 2 k2 nc no connect b2 ch1 - mdb+ channel 1, mdb+ 2 k3 nc no connect b3 ch1 - mda - channel 1, mda - 2 k4 nc no connect b4 ch1 - mdb - channel 1, mdb - 2 l uart_p bit uart 4 c d+ usb d+, bit 3 m uart gnd bit uart ground 4 d d - usb d - , bit 3 n uart_n bit uart 4 e nc no connect p1 nc no connect f1 ch1 - mdc+ channel 1, mdc+ 2 p2 nc no connect f2 ch1 - mdc+ channel 1, mdd+ 2 p3 nc no connect f3 ch1 - mdc - channel 1, mdc - 2 p4 nc no connect f4 ch1 - mdc - channel 1, mdd - 2 r ground dc return g nc no connect s nc no connect h nc no connect t usb gnd usb ground 3 j nc no connect u usb vbus 5v, usb supply 3 notes 1. power supply status indicator is high , referenced to 3.3v dc, when power supply is working correctly and low for fault or warning condition . 2. ieee - 802.3 1000base - t compliant 3 built in test port, usb2.0 4 built in test port, rs422 uart ( txd)
?2013 glenair, inc. rev: 2 us cage code 06324 printed in usa glenair, inc. ? 1211 air way ? glendale, ca 91201 - 2497 ? tel: 818 -247- 6000 ? fax: 818 - 500 -9912 www.glenair.com page 13 of 13 e- mail: sales@glenair.com 050- 110 media converter, single cha nnel 10/100/1000base - t to 1000base - lx10, gfoca, smf, 5 - 36vdc input/output definition (continued) j2 ? power connector d 38999 series iii, 9 - 35 mating face for pin shown 6x size 22d j2 pin function assignments pin name description notes 1 isolated case ground 2 isolated case ground 3 isolated case ground 4 isolated case ground 5 vcc 18 - 36vdc 6 vdc return j3 ? optical connector gfoca mil - dtl - 83526/16 type, 4 channel j3 pin function assignments pin name description notes s 1 nc no connect s 2 tx1 channel 1 transmitter p1 nc no connect p2 rx1 channel 1 receiver

▲Up To Search▲

Price & Availability of 050-110

	To Download 050-110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .